How To Repair Amerimax Windows

Amerimax Care & Maintenance Guide

While your Amerimax vinyl windows and patio doors require little care and maintenance, it is recommended that you clean and inspect them at least once a year to keep things operating smoothly and to protect your warranty. This folio outlines how to become nearly keeping your windows and doors properly cleaned and maintained.

Glass Care

Regular cleaning of your insulating, low-east or heat reflective drinking glass is a relatively piece of cake, this is an important part for maintaining their effectiveness and to ensure the best operation over the life of the product.

Do'S:

• Make clean glass with a mixture of mild soap and water or glass cleaner. Rinse completely with clear water and dry with a soft fabric or squeegee to help avoid water spots.
• When cleaning exterior, multi-story windows, begin with the upper story and piece of work downward.
• Clean and rinse one surface area at a time.

DON'TS:

• Do not power-wash windows or use a high force per unit area hose. This tin can damage the glass seal or crusade water to enter the construction.
• Don't allow water or cleaners to pool or collect at the glass edges near glazing materials.
• Avoid cleaning in direct sunlight or in temperatures too hot or too cold.

  

  Mild soap and glass cleaner are recommended for routine intendance of your Amerimax products.

• Never use abrasive cleaners, petroleum based solvents or chemicals on glass every bit they tin damage the drinking glass, insulated glass seal or other window components.
• Never utilise metal tools, razor blades, annoying pads or other precipitous objects as they can damage window surfaces, scratch glass and remove exterior glass coatings.
• Exercise not scour and avoid excessive rubbing or over cleaning.

Amerimax Frame Care

Protecting the frames of your windows and doors is simply equally important as cleaning the glass. While the vinyl or aluminium material naturally prevents penetrating stains from clay and grease, it is still important that you clean and maintain to protect the life and extend the beauty of your windows, patio doors and even your pet door.

DO'Due south:

• Vacuum soil and debris from the sill or track prior to washing.
• Windows and doors accept weep holes. Brand sure they are clear of obstruction and draining properly. See Window Weeping/Drainage Systems for more than information.
• Use a mixture of mild soap and water.
• Rinse completely and dry with a soft cloth.
• Use a cream wax cleaner or polish for more stubborn stains.

DON'TS:

• Never use abrasive cleaners, solvents or chemicals as they may damage the terminate or other components.
• Don't use a difficult bristle brush on finishes.
• Don't allow h2o or cleaners to puddle or collect on surfaces and crevices.

Cleaning and lubricating the window track twice a yr is suggested for piece of cake operation.

Americoat Painted Frame Care

Our painted vinyl products are painted with a superior painting process that is highly durable and requires the same maintenance as our standard frames. Still, it is all-time to remove contaminates and debris as speedily every bit possible. Soap and water are recommended.

Hardware Cleaning and Lubrication

Hardware parts, tracks and rollers should exist inspected and lubricated annually. More than oft if in loftier moisture or a salt air environment.

We recommend a dry silicone spray for lubricating tracks.

Exercise'S:

• Employ balmy soap and water on a soft cloth, rinse and thoroughly wipe dry.
• For stubborn dirt utilise a soft bristle brush.
• Utilize a dry silicone spray on hinges, rollers & sash where frame contact is made.
• Employ a coat of high quality, non-annoying car wax.

DON'TS:

• Never use abrasive cleaners, solvents or chemicals as they may damage the finish or protective coatings.

Screen Care

Because our screens are fabricated of advanced materials, it is not necessary to remove the screen for the initial cleaning. You can but vacuum make clean or gently wipe downward with h2o and a soft fabric. For a more detailed cleaning:

• Gently scrub with a soft bristle brush and balmy soap and water.
• Rinse make clean.
• Reinstall screen when dry.
• Rolling screen doors may need to be adjusted to run smoothly. Simply use a screwdriver at both the top and bottom corners to make the aligning.

Note! Screens are non covered under Amerimax'due south Lifetime Warranty.

Sliding Patio Door Roller Aligning
To adjust the patio door rollers for proper pinnacle clearance, remove panel plugs to access the adjustment screw. Simply plough the screw to arrange the vent either higher or lower and replace the plug when finished.

Sliding patio door roller aligning with plug removed. Raise or lower your door, based on operation and leveling of panel.

Amerimax Patio Door Care

Most moving parts, including window and patio door vent panels, crave annual inspection, cleaing and lubrication to ensure shine and piece of cake operation. In high moisture or salt air environments, more than frequent cleaning and lubrication is necessary. Too maintenance on your pet door should be considered if needed.

DO'S:

• Vacuum soil and droppings from the sill or track prior to washing.
• Windows and doors accept cry holes. Make sure the are clear of obstruction and draining properly. See window weeping/drainage systems for more information
• Utilize a mixture of mild soap and water.
• Rinse completely and dry with a soft cloth.
• Cream wax cleaner or polish tin can be used for stubborn stains.
• Clean and lubricate the rails organization.

DON'TS:

• Never employ abrasive cleaners, solvents or chemicals every bit they may damage the finish or other components.
• Don't apply a hard bristle brush on finishes.
• Don't allow water or cleaners to pool or collect on vinyl surfaces and crevices.

Patio Door Lock Adjustment

You lot may need to realign your strike plate with the frame panel lock if yous have made any vent panel adjustments. Locate the strike plate screw and turn for proper alignment and examination that the door locks securely.

Water Management

Weep system on the Amerimax WinPro Series exterior shown.

Vinyl and Aluminium windows and patio doors are non bailiwick to moisture damage; nonetheless, impairment could develop in the structure effectually the unit if h2o does not drain properly from the sill surface area to the exterior. A simple drainage arrangement of "weep" holes are designed into the frame to let for accumulated water to bleed to the exterior of the dwelling. While it is normal to see some water in the bottom rail or sill with current of air driven rain, these water drainage pathways must be kept clean and articulate of obstructions to operate effectively and to ensure no water infiltration into your home.

• Vacuum soil and debris from the sill or track prior to washing.
• Make certain that cry holes are clean of all droppings, stucco, dirt or other blockage.
• Use a soft bristle brush such every bit a toothbrush or paintbrush to articulate weeps should they go clogged.
• Use of an air compressor or can of compressed air can be used to remove debris from weeps.

Interior Condensation

The interior of windows can encounter condensation due to loftier humidity levels and poor air menstruation in a domicile. High efficiency, high-performance windows are weather condition tight, just this too reduces air apportionment.

In order to reduce the likelihood of window condensation, take these steps in your home:

• Remove or reduce sources of moisture, such as aquariums, humidifiers and plants.
• Run exhaust fans or open windows to better air flow and ventilation, particularly when showering or cooking.
• Let air menses near windows. Raise interior blinds or shades a few inches higher up window sill.

Other Condensation Factors:

• Window Screens: Windows with screens may have different condensation patterns than windows without, even in similar weather.
• Weather Conditions: Condensation tin can exist heavily influenced by seasonal or dark weather weather. In cold, winter months and in warm weather also, the glass temperature will oftentimes be higher up the dew indicate.
• Outdoor Air Apportionment: If a window is blocked by copse or bushes, other projections or structures, it may cause condensation. On the other hand, adept air menses will reduce the likelihood of condensation.
• Shades or Blinds: Keeping shades and blinds open can aid reduce condensation as more than heat tin transfer to the glass, while also improving air flow to the window.

Exterior Condensation

Summer condensation occurs when the outside window surface is cooler than the dew point temperature of the outside air. This is a natural occurrence.

Find more than information visit: world wide web.aamanet.org/pages/agreement-indoor-condensation

Drinking glass Breakage

If the glass in a Amerimax window gets broken, consult your Amerimax Window dealer for assistance. We recommend that drinking glass panes be replaced by a professional to ensure continued thermal performance and to accost safety issues.

Tempered Glass

Tempered glass can handle affect better than ordinary glass, but it can break. If a tempered glass pane is broken, it should exist replaced past tempered glass in accordance with local building codes.

Difficulty Opening or Endmost the Sash

If you experience difficulty in opening or closing the sash on Amerimax casement or single-hung windows, showtime make sure that the lock handle is completely disengaged. By slightly turning the handle and applying pressure to the sash, the sash should open normally.

If this does not solve the trouble, brand sure that dirt or droppings is not blocking the slider runway. To remove any debris, clean the track with soapy water and a small castor (an sometime toothbrush works well.), or with a vacuum cleaner. Afterwards the track is clean, y'all may want to lubricate information technology with a dry silicone spray.

If the sash drags or hits the window frame, your window is out-of- square. Contact your Amerimax Window dealer for assistance.

Window Coverings

Coverings installed too close to the drinking glass tin can cause the drinking glass to crack, the seal to fail, or develop excessive condensation on the glass. When installing blinds, get out a minimum of 2" clearance betwixt the glass and shading device, and 1-1/2" clearance at the pinnacle and lesser or ane side and lesser to allow natural air movement.

Climate and Condensation

If y'all live in a colder climate, warmer, more humid indoor air, compared to the temperature exterior, can crusade water droplets, frost and even ice to course on the within of your windows.

More specifically, condensation occurs when the temperature of a surface – in this case, your windows – is less than its dew point temperature. The dew point temperature varies for every surface, and windows are more than susceptible to condensation than other household surfaces considering they tend to be the coldest part of a house. What'due south more, as the relative humidity (the amount of moisture in the air) of a room increases, the dew signal temperature of surfaces increase as well.

For example, when the temperature of the glass in your window is 45˚F and its dew point temperature is 50˚F, the result is condensation. The condensation volition only evaporate when the window temperature rises to about l˚F. In add-on to obscuring your view, condensation can also do visible and invisible impairment to your home. Curtains, carpets, and even the windows themselves tin can be affected. The construction of your home tin can too be compromised every bit moisture may permeate your walls and insulation.

A Divergence "U" Can See

The good news is not every window is the same. As you have learned, increasing the temperature of the glass higher up its dew betoken temperature will eliminate condensation. On a cold solar day, when you would normally be heating your house, it is of import to decrease the transfer of that heat through the window.

This is known as the U-gene; the thermal transmittance of the window. The lower the window's U-factor rating – typically betwixt 0.20 and i.xx – the less warmth escapes your house, resulting in a decreased possibility of condensation forming.

The U-factor of any window product is actually adamant past several factors, which work together to keep the glass condensation-free.

Your Three-tiered Solution

The windows in your home are made upwards of three essential parts, each one with the potential to eliminate condensation inside your home. All 3 must be thermally efficient to preclude estrus from being conducted out:

Centre-of-Glazing Multiple-glazed windows or insulating drinking glass units are recommended over single-glazed windows for keeping condensation at bay. Additionally, energy-efficient and depression-e coatings volition further reduce the potential for condensation. Edge-Of-Glazing Condensation on the edge-of-glazing tin likewise be reduced by choosing loftier performance dual-glazed or insulating glass units over single-glazed windows. Frame Thermally improved framing materials such as vinyl and forest, instead of metallic framing systems, reduce the chance for condensation formation.

Source: https://www.amerimaxwindows.com/support/care-maintenance.php

Posted by: smithmallons01.blogspot.com

Share this post