How To Remove Sunglass Lenses

Hither in this article, yous volition find iv guides on how to remove the lenses from glasses. Depending on the glasses you have you lot volition need some tools to remove the lenses. The options for the frames are:

Plastic Frames
Metal frames
Nylon frames
Rimless frames

Almost people nowadays have plastic frames. So let united states of america start with them. In about cases, it is the easiest method to popular them out because information technology oftentimes requires no tools. You lot just demand to know where to use the force per unit area with your fingers on the lenses and the frame. For every instance, we uploaded a brusque video to this website embedded in this commodity. It might exist helpful to lookout man it earlier you take action.

How To Pop the Lenses Out of Plastic Frames?

If you accept plastic frames the lenses pop out in well-nigh cases fifty-fifty if you do non apply oestrus to them. Outset I take a guide for you without heat considering with an increase in temperature the coating of the lenses could be permanently damaged.

Turn the glasses in a manner so y'all are looking at the side facing your optics.
Place both of your thumbs on the spot marked in the picture above.
The other fingers are touching the frame on the other side of the glasses.
Now apply pressure with your fingers so the lenses popular out.

If this does not work you can utilize pressure on the centre office of the upper role of the lenses. A lot of guides on the web recommend to heat your glasses up a piddling with warm water or a hairdryer. However as an optician I oftentimes saw damaged coatings so I simply recommend this approach if you lot do not want to utilize your lenses anymore.

The but thing you need to exercise with oestrus is to do non go to hot. If you get to hot the material of the frame or the coatings could suffer. Depending on what you hold in your easily. Near plastic frames are made out of acetate and then applying a niggling rut will be fine.

How To Remove Lenses From Metallic Frames?

A lot of the metallic frames require a screwdriver to loosen open the rim lock. Simply look at the small screw if a slotted or a cross screwdriver is required.

Identify the frame safely so you lot can not slip off with the screwdriver.
Secure your lens by placing your thumb on the lens near the rim lock.
Open up the by turning it to the left.

If you lot tin can not observe any screws or the rim lock on around the metal frame (usually they are placed on the side of the temples) you probably need to pop the lenses out. The approach works exactly equally described above with the plastic frames.

Nylon Frames – Loose the Nylon Thread and You Can Accept the Lenses Out

Nylon frames usually have a pocket-size transparent nylon thread that holds the lenses in the lower part of your glasses. Prepare a difficult plastic strapping band for this task. To remove the lenses from these glasses you need to perform the following steps.

Agree the lenses and pull the frame a lilliputian abroad from the lenses.
This style a tiny gap appears between the lens and the frame.
Stick the plastic band in the gap betwixt lens and frame.
Pull the plastic ring downward the lower part of the frame where most of the nylon thread is located.
Now you tin hands remove the nylon thread by pulling it gently.
This way yous can remove the lens.

Rimless Frames

A lot of rimless frames agree the lenses with screws and nuts. Especially the basics are often times tiny 1,2mm or ane,4mm. And so be prepared with the right tools before y'all want to remove the lenses out of those glasses. Because if you have no experience you lot volition probably slip off and scratch your lenses.

With rimless frames that hold the lenses with nuts and screws you will face the problem to turn the screw while simultaneously locking the nut from the other side. Then before you lot slip off secure the lens surface with tape so you practise non instantly scratch the surface if something goes incorrect.

If the lenses are mounted to the frame with a plugin system you probably tin not the remove the lenses of your glasses. considering in this case usually special tools are required and the plastic sleeves to install the lenses over again.

And then in this instance it is definetly non every bit easy as popping the lenses out or back in.

There is a lot of variety when information technology comes to the ways how the lenses are mounted in the frame. Hither nosotros talked about the most common ones and how to get the lenses out of the frame. If the solution was not here for your spectacles seek an optician for an solution. He will exist happy to assist you out.

I wish you a slap-up day.